Turn it counterclockwise and continue turning until the drain flange is released, then remove the flange while it’s still attached to the drain key. If you’re removing the entire drain apparatus, including the basket (also known as the flange), insert your drain key or smart dumbbell into the opening. Repeat as necessary until the tub empties at a reasonable rate, then proceed to reinstall or replace the part(s) you’ve removed. Fill the tub again with about an inch of water, and watch it drain. If the water still drains too slowly, move on to a stronger drain cleaner (one that specifies that it’s suitable for tubs) or turn to a tried-and-true DIY drain cleaner that uses materials you already have on hand. Now, fill the tub with an inch or so of water and watch it drain. STEP 3: Use a bathtub drain cleaner to clear any clogs. Also clean the plug or stopper if you’re planning to reinsert it rather than replace it. Once the drain basket is fully exposed, use a mild cleanser or a mixture of one part vinegar and one part baking soda and a soft cloth to wash it off. STEP 2: Clean the drain basket and stopper.Īn important part of learning how to remove a tub stopper is also understanding the need to clean all the parts thoroughly. Use your wrench or screwdriver to nudge it into motion if necessary, but be careful not to use too much force, which could damage the drain. If you find that the set screw on your lift-and-turn drain is stuck, a series of light-to-medium taps may help to loosen it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |